Serving the Hartford area  ·  (959) 777-4498  ·  Open Mon-Sun 7am-7pm
📞 (959) 777-4498 Free Quote

Metal Roofing in New Britain, CT (6051) · Local Professionals

Hartford Metal Roofing · Fast response in New Britain and the Hartford area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+339Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

New Britain's triple-deckers and capes are packed tight along streets like Broad and Arch, and most of those roofs are well past their shingle years. If you're near Walnut Hill Park or down in the East Side, you've seen the same thing we have: aging asphalt that's one nor'easter away from a leak.

Homeowners in New Britain (6051) call Hartford Metal Roofing because we know these older homes, tight lots, and steep pitches, and we install metal that lasts through Connecticut's freeze-thaw cycles. We're a Metal Roofing Alliance member, fully insured, and we handle everything from a small leak repair to a full replacement.

Metal Roofing in New Britain (6051)

New Britain's housing stock is a mix of 1870s Victorian, brick triple-deckers, and post-war capes, often on narrow lots with little room for staging. That means we plan access carefully, use compact equipment, and protect neighboring properties. The city's hills and older drainage patterns also mean ice dams and spring thaw water can back up under shingles, especially on north-facing slopes. We often recommend standing seam or a retrofit over existing shingles where code allows, and we always check the decking because older homes here can have soft spots after decades of leaks.

Our team has worked on everything from Parkville two-families to capes near Stanley Quarter Park. We know the local building department's inspection rhythm and what it takes to get a metal roof signed off in New Britain.

Our services in New Britain

How a Job Works in New Britain

Step 1: Call us at (959) 777-4498 or request a free estimate online. We'll schedule an on-site assessment, inspect your current roof, check flashing and decking, and talk through metal options that fit your home's style and your budget.

Step 2: Once you approve the scope, we pull the required permits (roofing permits are commonly needed for replacement or re-roof, and rules vary, so we confirm with the City of New Britain website). On tight lots, we coordinate material delivery and staging so we don't block driveways or sidewalks. Our insured crews handle installation, repair, or retrofit, and we keep you updated on timing.

Step 3: We clean up daily, magnet-sweep for nails, and do a final walkthrough with you. We don't leave until you're satisfied and the site is clean.

Pricing in New Britain depends on roof size, pitch, access, and condition. As a ballpark: corrugated or ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) from $7 per square foot, and standing seam from $10 per square foot. Repairs like leak fixes start at $450, and screw replacement and re-fastening from $750. We give free estimates, so call (959) 777-4498 and we'll give you a real number for your property.

✅ Metal Roofing Alliance Member, licensed and insured for work in New Britain and nearby areas.

My triple-decker in New Britain has a low-slope roof section. Can you still install metal?
Yes. We use standing seam or ribbed panels with proper underlayment and seam sealing for low-slope areas, and we check the existing structure first. Many triple-deckers have porch roofs and additions with different pitches, so we assess each section separately.
A storm just peeled back panels on my roof in New Britain. How fast can you respond?
Call us at (959) 777-4498. We offer free storm and wind damage inspections and will tarp or secure the roof quickly to prevent further water damage, then schedule permanent repairs.
What's the typical cost to replace a shingle roof with metal on a cape in New Britain?
For a typical 1,200 to 1,800 square foot cape, a retrofit over shingles might run $7 to $9 per square foot installed, while a full tear-off and standing seam job could be $10 to $14 per square foot. Access, decking condition, and panel choice all affect the final price.
Do I need a permit for a metal roof in New Britain?
Roofing permits are commonly required for replacement or re-roof, and requirements vary. We confirm the current rules with the City of New Britain before starting, and we handle the paperwork as part of our service.
My neighbor's tree branches hang over my roof. What are my options if I want metal?
We can trim back branches that overhang the roof (with your permission) and install snow guards to protect gutters and walkways. For property line issues, we recommend talking with your neighbor first; we can also coordinate with your HOA if you have one.
Are you insured for work on my New Britain property?
Yes, we are fully insured with general liability and workers' compensation coverage. We're happy to provide a certificate of insurance before work begins.
What maintenance does a metal roof need in New Britain's climate?
Check fasteners and seals annually, especially after winter, and keep gutters clear of maple leaves and debris. We offer inspections and tune-ups to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Hartford

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Hartford

All your work handled by qualified professionals in Hartford

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

339+ Verified Client Reviews in Hartford

⭐⭐⭐⭐⭐ 4.9/5 · 339 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Hartford · Response within 24h · No commitment · ☎ (959) 777-4498

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Hartford ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm