Serving the Hartford area  ·  (959) 777-4498  ·  Open Mon-Sun 7am-7pm
📞 (959) 777-4498 Free Quote

Metal Roofing in Hartford, CT (6106) · Local Professionals

Hartford Metal Roofing · Fast response in Hartford and the Hartford area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+339Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Hartford's housing stock tells its history in slate and shingle: Asylum Hill Victorians with steep Queen Anne rooflines, brick two-families and triple-deckers in Parkville and the South End, and post-war capes out toward West Hartford. Up on the ridge streets, nor'easters and heavy wet snow like the October 2011 storm decide how long a roof actually lasts.

When a roof starts leaking through failed fasteners or an ice dam backs up at the eaves, Hartford homeowners call Hartford Metal Roofing. We're based right here, we know the freeze-thaw cycles along the Connecticut River, and we install standing seam and copper systems built for Connecticut winters.

Metal Roofing in Hartford (6106)

Hartford roofs take a beating that's specific to this city. The 1870s to 1910s Victorians in Asylum Hill and the West End have steep pitches, ornate trim, and often three or four roof planes meeting at a valley, which means flashing details matter more than panel count. Brick 'perfect six' two-families in Parkville and the South End sit close to the property line, so staging and ladder access get tight. Out in Windsor and Suffield, the long shade-tobacco barns and dairy barns need agricultural panels that can handle wide spans and heavy snow loads. Everywhere in between, sugar maples and oaks drop limbs and fill gutters, and ice dams form at the eaves when heat escapes through older attic insulation.

Our crews handle standing seam and copper specialty work on Hartford's historic homes, and we're HIC-registered and fully insured with general liability and workers' compensation. We've worked on enough Hartford roofs to know that a retrofit over existing shingles only makes sense when the deck is sound and the layer count is within code.

Our services in Hartford

How a Job Works in Hartford

Step 1: Call us at (959) 777-4498 or request a free estimate. We schedule an on-site assessment, walk the roof, check the deck and flashing, and talk through panel profiles and colors that fit your house and any historic district rules.

Step 2: We pull the required roofing permit through the local building department and coordinate with HOA or historic review if your block has one. On tight Parkville lots we stage materials in the driveway or on the street per city rules, and we protect landscaping and neighboring property. Crews handle tear-off, deck repair, underlayment, and panel installation, keeping the site weather-tight each day.

Step 3: We clean up completely, haul away old shingles and metal scraps, and walk the finished roof with you. You get a final inspection and a clear explanation of what was done, plus maintenance guidance for Hartford winters.

Pricing in Hartford depends on roof size, pitch, access, deck condition, and how fast you need it done. As a ballpark: corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation around $8, standing seam around $10, and copper or specialty metal around $20. Repairs start around $450, screw replacement and re-fastening around $750, and flashing or chimney work around $600. Snow guards and ice protection start around $1,200, and gutters for metal roofs run about $9 per linear foot. Storm damage inspections are free. Call (959) 777-4498 for a free estimate tailored to your Hartford property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Hartford and nearby areas.

My Asylum Hill Victorian has three roof valleys and original trim. Can you match a metal roof to that architecture?
Yes. We regularly work on Queen Anne and Italianate homes in Asylum Hill and the West End, where steep pitches and multiple valleys demand custom flashing. We can fabricate trim to match the profile and recommend panel styles and colors that respect the historic look, and we'll coordinate with historic district review if your property falls within one.
A nor'easter peeled back panels on my roof in Hartford. How fast can you respond?
Call (959) 777-4498 and we'll schedule a free storm damage inspection as soon as conditions are safe. We handle wind-lifted panels, separated seams, and fallen-limb punctures, and we document the damage for your insurance claim. We never promise coverage, but we provide the photos and written scope your adjuster needs.
What does a typical metal roof replacement cost for a brick two-family in Parkville?
Most Parkville two-families fall in the range of $9 to $14 per square foot installed, depending on roof size, pitch, and whether the deck needs repair. Standing seam runs higher than corrugated panel. We give a written free estimate after walking the roof, and we factor in tight lot access and any historic review requirements.
Do I need a permit to replace my roof in Hartford, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and thresholds and inspection requirements vary by jurisdiction. We pull the permit and schedule inspections as part of the job. For details specific to your address, check the City of Hartford website or call the building department, and we'll walk you through what's needed.
My neighbor's tree overhangs my roof and my HOA has rules about panel color. Can you help?
We can recommend panel profiles and colors that meet HOA design standards, and we'll submit the paperwork if your association requires approval. For overhanging branches, we document the condition and recommend trimming before installation. Property line disputes are between you and your neighbor, but we keep our staging and work within your property boundaries.
Are you insured for work on my Hartford home?
Yes. Hartford Metal Roofing is fully insured with general liability and workers' compensation coverage. We're happy to provide a certificate of insurance before work begins so you have it on file.
How should I maintain a metal roof through Hartford's freeze-thaw winters?
Keep gutters and valleys clear of maple and oak leaves before snow flies, and have us inspect fasteners and seals each fall. Ice dams form when attic heat escapes, so improving insulation and ventilation helps more than anything. If you see snow guards loosening or panels lifting after a storm, call (959) 777-4498 for a free inspection before the next freeze.
Why choose us?

Trusted professionals in Hartford

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Hartford

All your work handled by qualified professionals in Hartford

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

339+ Verified Client Reviews in Hartford

⭐⭐⭐⭐⭐ 4.9/5 · 339 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Hartford · Response within 24h · No commitment · ☎ (959) 777-4498

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Hartford ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm